Internal signage at EV-charging points

Front and rear equal sign, double-sided (see also floorplan)

Application:

• Signage EV-charging suspended perpendicular to driving aisle for visibility

  • Position aligned with front of parking space at heart of a single space

• EV-charging device (wall mounted), colour reference neutral light colour

  • Position always between parking spaces and never at heart of a single space

  • Bottom of EV-charging device at 800mm+floor

  • Power supply via ceiling

Specifications:

• Panel:

  • Panel (double-sided) glued on 18mm wbp plywood,
    at lateral side & joints plywood painted RAL9005 jet black

  • Dibond plate (2mm) (www.Dibond.eu), platinum white (~RAL9016) matt (double-sided)

  • Foil on plate: 3M 3630-57 olympic blue / Oracal 8500-53 light blue (double-sided)

  • Signage cut out of blue foil

• Dimensions:

  • Height = 300mm

  • Width = 300mm

• Q-drawings:

  • Q.32.A Signage, suspended

  • Q.32.B Signage, mounting on ceiling

Section

Floorplan

Internal signage at EV-charging points (A1-frame)

Application:

• A1-frame (wall mounted) for communication EV-charging

• Position always between parking spaces and never at heart of a single space

• Minimal 1x A1-frame per 4 CPs where CPs are located

Specifications:

• A1-poster:

  • Poster size: height x width = 832 x 593mm

  • Poster layout: CPO branded & mandatory information:

    • Clear CP usage instructions (start/stort session, unplug etc.)

    • CPO customer helpdesk phone number and e-mail

    • Tariff information reference (where to find charging tariffs?)

    • Location of the specific charge point ID (reference number)

    • Explain functionalities (indicator/display colours)

    • Optional subtle co-branding with Q-Park (not preffered)

• Dimensions A1-frame:

  • Height = 924mm

  • Width = 690mm

• Q-drawings:

  • Q.33.B Signage A1-frame, wall fastening

Section

Floorplan

Internal signage at EV-charging points (optional signage)

Example

Example

Example

Application:

• Only applicable in case legally binding message is needed

• In order to distinct regular CPs (AC<11kW) with fast CPs (DC>22kW) where applicable

• Sign preferably wall mounted (top of sign = top of A1-frame)

• Position always at heart of the EV-charging space

• 1 sign per parking space

Specifications:

• Panel:

  • Panel (single-sided) glued on 18mm wbp plywood
    At lateral side and joints plywood painted RAL9005 jet black

  • Dibond plate (2mm) (www.Dibond.eu), platinum white (~RAL9016) matt

  • Foil on plate: 3M 3630-57 olympic blue / Oracal 8500-53 light blue

  • Signage cut out of blue foil

• Dimensions:

  • Height = 300mm

  • Width = 610mm

• Q-drawings:

  • Q.33.A Signage, wall fastening

Section

Floorplan